IWAC118S
High output/size ratio lightweight and design easy & integrated rigging
The IWAC118S is a Line Source Speakers.
- Real 1200W RMS power capacity
- Premium 18” Neodymium driver with ±11mm linear Xmax
- Triple forced cooling system for low power compression
- Heavy braced cabinet for vibration free dynamic response
- Fully integrated rigging for floor stacking and flying
- Touring grade Rubberized PolyUrea finish
IWAC118S subwoofer is suitable for bass reinforcement for main PA systems, touring or permanent installations for small to large stages, indoor or outdoor live performances.
View
View
View
View
View
View
Technical specifications
| Speaker type | Flyable line source sub woofer |
| Power Handling (AES standard) | 1200 W RMS / 4800 W Peak |
| Nominal impedance | 4 ohms |
| Average sensitivity | 97 dB / 1 W / 1 m |
| Maximum SPL (calculated) | 128 dB RMS / 133 dB Peak |
| Frequency response (-6 dB with preset) | 33~100 Hz |
| Nominal directivity (-6 dB) | Omni in usable range. Cardioid preset |
| Cabinet |
Exterior grade Baltic Birch Plywood Heavily braced with Tongue & Groove |
| Cabinet finish |
Rubberized PolyUrea Black coating Acoustic PU foam behind Front grill |
| Floor monitor use | Does not apply |
| Flying hardware | Fully integrated, cable-free, rigging |
| Mounting hardware | 1pc M20 thread socket |
| LF |
18" CELTO ACOUSTIQUE 18EXN1200 |
| Woofer Chassis | Die Cast Aluminium |
| Woofer Voice coil diameter | 4" / 100 mm long throw |
| HF | Does not apply |
| HF RMS power (AES standard) | Does not apply |
| HF Exit | Does not apply |
| HF Voice coil diameter | Does not apply |
| HF Diaphragm | Does not apply |
| Crossover | No, active mode only |
| Connectors |
Genuine NEUTRIK 2pcs Speakon NL4 mP on rear, 1pc on front 1+/-1 input |
| Speaker size (HxWxD) | 518 x 700 x 745 mm |
| Speaker Weight | 55 kg |
| Shipping information |
66 kg 618 x 800 x 845 mm |
| Accessories |
IWAC118S-TK (Touring Kit) IWAC118S-FR (large flying frame) IWAC118S-WB (metal wheelboard) IWAC118S-SBAG (padded cover bag) CPC-70 (pole bar with crank) SUBWHKIT100C (castor wheel kit) |