CORE C2.10

Refined Muscle. Zero Drama.

Installation Portable Amplifiers C Amplifiers
basket-outline Where to buy
CORE C2.10 image 1
CORE C2.10 image 2
CORE C2.10 image 3
CORE C2.10 image 4
CORE C2.10 image 5
CORE C2.10 thumbnail 1
CORE C2.10 thumbnail 2
CORE C2.10 thumbnail 3
CORE C2.10 thumbnail 4
CORE C2.10 thumbnail 5

Description

Balanced power for demanding applications—the CELTO Acoustique C2.10 steps up with 2 × 750 W @ 8 Ω (1100 W @ 4 Ω) and refined 2-step Class H efficiency. Perfect mid-tier solution for clubs, theatres, and mobile sound where clarity and control are essential. Sensitive input stage (0.775 V) and high damping factor (>500) deliver tight, accurate reproduction across the spectrum. PeakStop Opto-Limiter and full protection suite safeguard both amp and speakers without compromising dynamics. Robust linear PSU with toroidal transformer ensures stable performance under varying loads. Comprehensive rear panel with Neutrik connectors and bridge/parallel modes adds versatility. Weighing 16 kg in a 2U chassis, it strikes the ideal balance between power and practicality. The C2.10 reminds us that true professionals value consistency above all else.

Key Features

  • 2 × 750 W @ 8 Ω (1100 W @ 4 Ω) with bridge mode 2200 W @ 8 Ω
  • 2-step Class H design with high damping factor (>500) for tight control
  • Full protection suite and PeakStop Opto-Limiter for worry-free operation
  • Sensitive input stage (0.775 Vrms) and >108 dB S/N ratio for transparent sound
  • Robust linear toroidal PSU and copper heatsink cooling for sustained performance

Applications

Installation Sound Architecture
Portable Professional sound, on demand

Technical specifications

Channels 2
RMS Power @ 8 Ω (per ch., EIA 1 kHz 1% THD) 750 W
RMS Power @ 4 Ω (per ch.) 1100 W
RMS Power @ 2 Ω (per ch.) Not recommended
Bridge @ 8 Ω 2200 W
Bridge @ 4 Ω —
Frequency Response (-1 dB) 20 – 20 000 Hz
Typical THD < 0.1 %
Signal to Noise Ratio (A-weighted) > 108 dB
Crosstalk (1 kHz) > 65 dB
Slew Rate > 20 V/µs
Damping Factor (8 Ω) > 500
Voltage Gain 40 dB
Input Impedance 20 kΩ
Preamp Low noise/low distortion + PeakStop Opto-Limiter
Output Stage / Class 2-step Class H
Power Supply Linear toroidal transformer
Cooling Front-to-back regulated fans + copper heatsink
Power Connector PowerCon (locking)
Input Connectors 2 × Neutrik XLR (latch) + 2 × XLR Link
Output Connectors 2 × Neutrik Speakon NL4 + 2 × binding posts
Dimensions (W×H×D) mm 483×88×378 (2U)
Weight Net 16 kg